GOODS LIFTS · WITH SHAFT
Goods lift with self-supporting shaft
No lift shaft in your building? A goods lift with a self-supporting steel shaft stands freely in the space, for example next to a mezzanine or between racking. Hublift supplies the lift complete with shaft and doors, with a lifting capacity of up to 10,000 kg.
Lifting capacity
Up to 10,000 kg
Shaft
Steel, enclosed or open
Lift pit
150 mm or ramp
Warranty
24 months
01 · IN BRIEF
Goods lift with shaft in brief
The most important facts, all in one place.
No structural shaft
The steel shaft is self-supporting. No concrete lift shaft is required.
Design
Enclosed with steel panels, or an open frame with mesh panels. With an open frame, the doors are also open.
Installation
Almost anywhere: in a warehouse, next to a mezzanine, in the racking or outdoors.
Doors
The safety doors are located in the shaft, at every entrance.
Finish
Standard powder-coated steel in RAL 7024, or a RAL color of your choice.
Standard
CE-marked, according to Machinery Directive 2006/42/EC.
02 · CONSTRUCTION
A complete lift, including shaft
With a goods lift with shaft, Hublift supplies everything: the platform, the hydraulic drive, the steel shaft and the doors. The shaft stands freely in the space and is built with few components. This ensures it remains sturdy, even with a high lifting capacity.
There is no roof on top, but a steel crossbrace that connects the corners. The Hublift logo is placed above the landing door.
The shaft can pass through a floor, so that the lift connects perfectly to every level.
03 · SELECTION GUIDE
When do you choose a goods lift with shaft?
There is no lift shaft
The self-supporting shaft replaces the structural shaft. You do not need to carry out any renovations.
The lift is placed near a mezzanine
The shaft fits in or next to the mezzanine. View the project at TRL Fulfilment.
There are machines or racking
The shaft is custom-made, so it fits between what is already there.
The lift is placed outdoors
With a shaft for outdoor use and a suitable IP protection class.
04 · SPECIFICATIONS
Technical specifications
Standard values. Every lift is custom built, so your version may vary.
Amount of cilinders
1 to 4
engine
2.2 kW, 400 V / 50 Hz
Speed
0.15 m/s
Lifting capacity
Up to 10,000 kg, depending on the platform
Floor recess
150 mm, or a ramp
Control cabinet
500 × 500 × 1,300 mm, within 2 m of the lift
Doors
Single or double hinged doors, 2,000 to 2,500 mm high
Shaft
Painted steel, standard RAL 7024
Safety
Protected against overload, hose and chain rupture, and uncontrolled movements
05 · OPTIONS
Options and versions
Shaft in RAL color
Adapt the shaft to your building, with a RAL color of your choice or finished with glass.
Shaft for outdoor use
A shaft that can withstand wind and weather, with a suitable IP protection class.
passenger transport
One attendant travels along in a closed cabin. See the goods lift with attendant control.
Electric roller doors
No room for hinged doors? Roller doors open and close quickly.
Cabin
A (partially) enclosed cabin, with safety sensors at the entrance and exit.
Ramp
Is it not possible to have a 150 mm pit? Then you can enter via a ramp.
06 · LIFT CONFIGURATOR
Configure your goods lift with shaft in 3D
Choose lifting capacity, shaft, doors, and stops in the lift configurator. You can see the lift immediately in 3D and request a quote based on your own design.
07 · PROJECTS
Goods lifts with shaft in practice
Real projects with a self-supporting shaft, with our own photos.
Goods lift with attendant for Veth Propulsion
Hublift installed a 1,500 kg goods lift with attendant at Veth Propulsion in Papendrecht, featuring a self-supporting shaft and high-speed roller doors. Bekijk project
Two goods lifts for Speicher Box self storage
Hublift supplied two custom-made 1,000 kg hydraulic goods lifts with cabins for a Speicher Box self-storage location in Germany. Bekijk project
Industrial goods lift of 2,000 kg for heavy materials
Second goods lift for Märkisches Werk: 2,000 kg, a self-supporting shaft in the existing pit, and a hydraulic locking system to prevent drifting. Bekijk project
08 · FREQUENTLY ASKED QUESTIONS
Questions about the goods lift with shaft
What is a self-supporting lift shaft?
A steel shaft that supports itself. It stands freely in the space, so no concrete lift shaft is required.
Can the shaft be placed outdoors?
Yes. There is a version for outdoor use, with a suitable IP protection class.
Can the shaft be a different color?
Yes. RAL 7024 is standard, but any RAL color is possible. A glass finish is also an option.
How deep must the lift pit be?
150 mm is sufficient. If a pit is not possible, we install a ramp.
How much does a goods lift with shaft cost?
A Hublift goods lift starts from €25,000. The price depends mainly on the number of stops, the lifting height and the shaft. See the goods lift prices.
How long is the delivery time?
Average 10 to 12 working weeks after drawing approval, plus approximately 2 weeks of installation by our own technicians.
09 · FURTHER READING
Other versions
Hydraulic goods lift
For an existing structural shaft.
With passenger accompaniment
One attendant travels with the load.
With roller conveyors
Loads and unloads pallets automatically.
Everything about goods lifts
Types, lifting capacity, options, and prices.
No shaft, but need a lift?
Tell us what needs to be lifted and what your building looks like. We will visit you without obligation to advise on the possibilities.
Hublift B.V.
Beukelszweg 2
5466 AT Veghel
0413 340 270
[email protected]